The Wondrous Santa Maria in Cosmedin Water Fountain in Rome

Archaeologists and restorers on the lookout for pagan and Christian artifacts in Rome have stumbled upon an abundance of them in the area of the Santa Maria in Cosmedin. The celebrated marble sculpture known as the Bocca della Verità (Mouth of Truth) can be seen in the portico of the basilica nearby. Built in 1719, the Santa Maria in Cosmedin fountain was not well known and located far from sight making it difficult to visit. 1256_green__98543.jpg It was said that there was very little to see in this area because it was abject and desolate making it an unfriendly place to visit. It was a this time that Pope Clement XI commissioned the Italian architect Carlo Bizzaccheri to put up a water feature to modernize the square outside the church of Santa Maria in Cosmedin. August 11. 1717 was the date when work on the church’s foundation commenced. The blessing of the first rock to be placed in the foundation was followed by medals being thrown in bearing the images of the Blessed Virgin, for whom the church is named, and St. John the Baptist, the patron saint of water.

The Broad Array of Wall Water Fountains

A small patio or a courtyard is a great place to put your wall fountain when you seek peace and quiet. Even a little space can contain a customized one. A spout, a water basin, internal piping, and a pump are vital for freestanding as well as mounted varieties. There are any variety of models to pick from including traditional, contemporary, classic, or Asian.

Usually quite large, freestanding wall fountains, also referred to as floor fountains, have their basins on the ground.

A stand-alone water feature can either be incorporated onto a wall already in existence or fitted into a wall under construction. Incorporating this type of water feature into your landscape brings a cohesiveness to the look you want to achieve rather than making it seem as if the fountain was merely added later.

Choose from all Kinds of External Water Features

Is it possible for you to transform your garden into a haven of serenity? Incorporating a fountain into your garden provides tranquility as well as a variety of powerful effects that come with having a water feature.

A eye-catching impact is produced when a spouting fountain sends a shooting stream of water up into the air. Large, existing ponds can have one of these incorporated without much difficulty. Esplanades and historical stately homes often have one these fountains.

Pick a stylish wall fountain to put outside. If you are eager to include a water feature, but are concerned because you have a small yard, do not hesitate to incorporate one of these.

Spouting fountains usually make quite an impact whereas wall features are more of an understated type of water feature. In a very straightforward process, the water spills out of a spout, trickles down a beautifully textured wall only to be pumped back to the top.

Your garden’s style dictates whether a themed fountain is suitable for you. Consider a classic type of statue, such as a cherub supporting a spout, for the fountain if your residence or garden is rustic in style. On the other hand, a more contemporary yard can include more of a bold design. Let your creativity run free to select the best option.

The main trait of a multi-tiered fountain is that water streams from a number of different levels. Cascading fountains is another expression used to identify this type of fountain because water streams down multiple levels.

Since external fountains require ample space, think about putting in a wall fountain or a pondless fountain. Install one of these fountains if your space is limited since their reservoirs are concealed from sight underground.

Install a Japanese fountain if you are looking for a sense of tranquility. Bamboo sticks serve as the piping from which water flows in these kinds of water features. Water then streams into a container or a shaped stone, only to repeat the cycle over and over again.

One of the many styles of fountain available is the glass fountain. Trellis-style fountains of this kind, showcase molded metalwork which provides a more conventional look. Water features of this kind are an excellent option for gardens with many sharp edges as well as contemporary forms and design.

As the water flows over the top of the glass it produces a dazzling effect. Some fountains also include colored LED lights to shine onto the sheets of glass as water streams downwards. A rock waterfall fountain (often made of imitation rock) shows off water slowly cascading down its façade.

Bubbling rock fountains are large stones drilled with holes which are then filled with tubes in the middle. Low pressure is employed to spout out the water which then bubbles and gurgles at the top. Water then streams as a delicate trickle down the sides of the rock to its base. This is yet another possibility for gardens with restricted space. This sort of fountain, which uses low pressure to move water, is ideal because it stops water from being sprayed around in windy weather.

The trend of setting up solar powered fountains is becoming progressively prevalent. The advantages of using this type of solar powered fountain is the lack of cables, lowered difficulty in installing them, the decrease in electricity bills, and the beneficial effects they have on our ecosystem. Outdoor solar-powered fountains are available in countless different styles, therefore, you will not have to settle on which one to buy.

The One Cleaning Solution to NEVER Use On Your Garden Fountains

Water fountains will keep working a long time with routine cleaning and maintenance. It is important to clean it out and take out any debris or foreign elements that might have gotten into or onto it. Another factor is that water that is exposed to sunlight is prone to growing algae. To prevent this, take vinegar, hydrogen peroxide, or sea salt and add directly into the water. Bleach can also be mixed into the water, however this is not the ideal option because it can harm birds or other animals.

Experts recommend that the typical garden fountain undergoes a thorough scouring every three-four months. The initial step is to get rid of all of the water. When you have done this, scour inside the water reservoir with a mild detergent.

A good tip is to use a toothbrush if there are small hard-to-reach spots. Do not leave any soap deposits inside of or on the fountain.

Numerous organisms and calcium deposits may get inside the pump, so it is recommended to take it apart and clean it completely. To make it less strenuous, soak it in vinegar for several hours before cleaning. Neither rain water nor mineral water contain components that will accumulate inside the pump, so use either over tap water if possible.

Finally, be sure to have a quick look at your fountain every day and add water if you notice that the level is too low. Low water levels can ruin the pump - and you don't want that!

Recommendations for Putting in an Outdoor Water Fountain

When considering where to set up your garden fountain, do not overlook the fact that you will need somewhere to plug it in and a convenient source of water. The thrill of owning one occasionally causes people to forget the technical aspects when setting it up for the first time. Since standard power cords are only 12 feet in length, you might need to attach an extension cord to reach the most convenient 120v outlet. Install your fountain in a place close to a water source as you will need to refill it. Water is difficult to move by hand from place to place. The best way to fill the fountain is with a nearby water hose. A water fountain autofill is yet another option, but will require the help of someone who knows how to set it up since the water has to go through an external line.

Water Delivery Solutions in Early Rome

Rome’s first raised aqueduct, Aqua Anio Vetus, was built in 273 BC; before that, inhabitants residing at higher elevations had to depend on local creeks for their water. Over this time period, there were only two other systems capable of supplying water to high areas, subterranean wells and cisterns, which gathered rainwater. From the early sixteenth century, water was routed to Pincian Hill through the subterranean channel of Acqua Vergine.

All through the length of the aqueduct’s network were pozzi, or manholes, that gave entry. Although they were initially manufactured to make it possible to support the aqueduct, Cardinal Marcello Crescenzi started using the manholes to get water from the channel, starting when he bought the property in 1543. He didn’t get adequate water from the cistern that he had built on his property to collect rainwater. By using an opening to the aqueduct that ran under his property, he was set to satisfy his water demands.


Acqua Vergine: The Solution to Rome's Water Problems
Aqua Anio Vetus, the first raised aqueduct built in Rome, commenced delivering the men and women living in the hills with water in 273 BC, even though they had counted on natural springs up... read more
Installing a Wall Fountain In Smaller Gardens
The greenery in your garden is the perfect place to situate your water feature. Ponds, man-made rivers, or fountains are just some of the ways you can you can make it become the central feature on your property. Water features make great add ons to both... read more
The Captivating Roots of the Wall Water Fountain
Hundreds of ancient Greek writings were translated into Latin under the auspices of the scholarly Pope Nicholas V who led the Roman Catholic... read more
The Captivating Roots of the Outdoor Fountain
As the leader of the Catholic Church, the scholarly Pope Nicholas V (1397-1455} decided to commission translations of invaluable texts from their original Greek into Latin. In addition, beautifying the city and making it the worthy capital... read more